UKAS-Tested Supplements in the UK: How to Check the Lab

UKAS-Tested Supplements in the UK: How to Check the Lab

To check that a supplement was tested by a UKAS-accredited lab in the UK, find the lab's name and accreditation number on the brand's test summary, search it on the UKAS website, and confirm the schedule of accreditation lists the tests reported. NovusDNA products are tested by Campden BRI (Chipping Campden) Limited, UKAS Accredited Testing Laboratory No. 1079.

That check takes about five minutes. This guide walks through it, then reads three published NovusDNA results line by line.

NovusDNA is a UK longevity and health supplement brand that makes science-led, precision-formulated supplements, independently tested by a UKAS-accredited UK laboratory, for adults who want to support long-term health with clear, transparent formulas. If you are looking at a daily routine built on that testing, the NovusDNA Foundation Stack brings together Longevity+, Metabolic+ and Essential+.

What UKAS accreditation actually covers

UKAS accreditation covers a laboratory's competence to run specific tests, not the product being tested. UKAS (the United Kingdom Accreditation Service) is, in the words of GOV.UK guidance on conformity assessment and accreditation, "the sole government recognised national accreditation body" for organisations in the UK.

UKAS describes itself as "the national accreditation body for the United Kingdom, appointed by government". It assesses organisations that provide testing, calibration, inspection and certification.

UKAS accreditation is a formal, independent confirmation that a laboratory is competent to carry out specific, listed tests to the international standard ISO/IEC 17025. For more on the standard itself, see the NovusDNA guide to what UKAS accreditation is and why the lab behind a result matters.

Accreditation is for tests, not for the whole lab

The detail most buyers miss is scope. A lab is accredited for the tests listed on its schedule of accreditation, and that schedule names the materials, the property measured and the method used for each one.

UKAS's own advice on choosing an accredited supplier says to check that "the service you need is listed as accredited". For a supplement, that means checking the heavy metal, microbiology or nutrient tests you care about appear on the schedule.

What it does and does not tell you

A UKAS-accredited result tells you that an independently assessed lab measured something in a sample, using a method it is accredited for.

It does not tell you that a product works, that an ingredient has a health effect, or that the result applies to a batch other than the one sampled. The NovusDNA general guide to verifying supplement quality in the UK covers those wider checks.

How to check a lab in four steps

You need the lab's name, its accreditation number and the list of tests a brand reports.

  1. Find the lab's name and number. Look on the product page or the testing summary PDF. A clear statement reads like "Campden BRI (UKAS Accredited Testing Laboratory No. 1079)". If only "UKAS-accredited lab" appears, ask the brand which lab and which number.

  2. Search the UKAS directory. On ukas.com, use "Search accredited organisations" and enter the lab name or number. Check that the organisation name matches exactly, such as "Campden BRI (Chipping Campden) Limited".

  3. Open the schedule of accreditation and read the header. The top of the schedule shows the organisation, accreditation number, standard and an issue number with a date. The Campden BRI testing schedule for laboratory 1079, checked October 2026, shows ISO/IEC 17025:2017, issue 120, dated 13 October 2026. Schedules are reissued, so the date tells you the version you are reading.

  4. Match the tests to the schedule. The schedule columns list "Materials/Products tested", "Type of test/Properties measured/Range of measurement" and the method used. On the Campden BRI schedule checked October 2026, arsenic, cadmium, lead and mercury appear under an ICP-MS method, and Salmonella, Listeria monocytogenes and E. coli each appear with their own methods.

The materials column matters too: a method may be accredited for "General" samples or for a named food category. The full certificate should state the methods used and which results fall within the lab's accreditation.

Reading a UKAS test summary: a worked example

A short testing summary gives you four things to read: the analyte (what was tested), the result, the unit and the testing date. Published NovusDNA summaries show the three common result types.

A quantity result: Hydrolysed Collagen

The Hydrolysed Collagen page reports 94.4 g collagen per 100 g and 11.80 g hydroxyproline per 100 g, from analysis by Campden BRI. The unit "per 100 g" means 94.4% of the powder by weight was measured as collagen.

Hydroxyproline is an amino acid found in meaningful amounts in collagen and very little elsewhere, so labs use it to confirm how much genuine collagen a sample contains. The NovusDNA article on how collagen potency is tested explains the calculation.

A "less than" result: Micronised Creatine

The Micronised Creatine page lists heavy metal results of arsenic <0.005 mg/kg, cadmium <0.001 mg/kg, lead <0.005 mg/kg and mercury <0.005 mg/kg. The "<" sign means the level was below the lowest amount the method reports.

It tells you the metal, if present at all, was under that reporting level. The unit mg/kg is milligrams per kilogram of product, the same as parts per million.

A presence or absence result: Lion's Mane

The Lion's Mane page reports Listeria monocytogenes, Salmonella and Shiga toxin-producing E. coli as not detected, with E. coli at <5 cfu/g. "Not detected" means the organism was not found in the sample size the method uses, often 25 g for Salmonella.

The unit cfu/g, colony-forming units per gram, counts live microbes that grow on a test plate. The same page shows measured heavy metal values, such as lead at 0.043 mg/kg, beside mercury at <0.005 mg/kg.

Dates and full certificates

Check when the testing took place. The Essential+ testing summary, for example, gives a testing period of September to October 2025 and confirms vitamin D3, vitamin K2 and magnesium were measured alongside microbiology.

NovusDNA publishes testing summaries on product pages, and full certificates with methods and accreditation scope are available on request by emailing info@novusdna.com. To read a full certificate once you have it, see the NovusDNA guide on how to read a full certificate of analysis.

UKAS testing vs sport certification

UKAS lab testing and sport certification answer different questions. Lab testing tells you what was measured in a product sample; sport certification schemes focus on screening for substances banned in sport.

The scheme details below come from each scheme's own pages, checked October 2026.

Feature

UKAS-accredited lab testing

Informed Sport

NSF Certified for Sport

 

Main question answered

What is measured in this sample, by an assessed lab

Has the product been screened for substances banned in sport

Do contents match the label, and is it screened for banned substances

Who runs it

Any UKAS-accredited lab, for the tests on its schedule

LGC

NSF

Scope stated by the scheme

Tests listed on the lab's schedule of accreditation

Screen covering over 285 compounds banned in sport or seen as a contamination risk

Label claim checks, contaminant screening, testing for 290 banned substances, facility audits

Batch wording stated by the scheme

Depends on what the brand sends for testing

States that each batch of a certified product is tested before sale

Production lots tested; ongoing annual product testing

The two approaches overlap. Informed Sport states that its testing uses ISO 17025 accredited methods, accredited in the UK by UKAS. Athletes subject to anti-doping rules have a specific reason to look for a sport mark; for everyday questions about contaminants and content, the UKAS route answers them directly. 

FAQ

Does UKAS testing mean the supplement itself is accredited?

UKAS accredits organisations such as laboratories, not the products they test. A supplement brand is not itself accredited by sending samples to an accredited lab. What a brand can do is name the lab and its accreditation number, which you can then check on the UKAS website.

Read "UKAS-tested" on a label as shorthand for "tested by a UKAS-accredited lab", and check it the same way. With a named lab and number, the four-step check above takes a few minutes and needs no account or payment.

What if the lab is accredited but a test is not on its schedule?

A lab may run tests outside its accreditation, and the result can still be valid, but it has not been independently assessed for that method. Ask the brand for the full certificate, which should show the method and whether each result falls within the lab's accreditation. Then compare the method with the schedule.

Specialist tests, such as particular nutrient or botanical markers, can sit outside a lab's listed scope. That does not make the figure wrong; it means the method itself has not been through UKAS assessment.

Does UKAS accreditation expire?

Accreditation is not a one-off certificate: labs are reassessed, and schedules are reissued as their scope changes. The issue number and date at the top of a schedule show which version you are reading. UKAS suggests checking accredited status regularly rather than relying on an old copy.

If a brand's summary is from a year or two ago, check that the lab held accreditation for that test at the time. The certificate date and the schedule issue history help you confirm it.

Is a UK lab more useful than an overseas one?

UKAS assesses labs operating in the UK, so for a UK brand a UK lab is simple to check on one website. Labs abroad are accredited by the national accreditation body of their own country. The same principle applies wherever the lab is: find the name, number and scope.

For a UK buyer, a UK lab with a public UKAS schedule keeps every step of the check on one site, and the schedule shows the UK sites covered, such as Chipping Campden.

Should I ask for the certificate for the exact pack I bought?

Asking for the certificate linked to your batch number is a reasonable request, and it lets you match the lot on your pack to the lot that was tested. If a brand responds with methods, dates and lab details, that is a good sign of transparency.

When you have the certificate, compare the batch reference, testing date and lab details with the published summary, and quote the batch number on your pack when you email. The NovusDNA certificate guide linked above shows what each section means.

Checking a supplement lab comes down to a name, a number and a schedule: confirm the lab on ukas.com, match the tests to its scope, then read each result with its unit and date. NovusDNA names Campden BRI, UKAS Accredited Testing Laboratory No. 1079, publishes testing summaries on product pages and supplies full certificates on request at info@novusdna.com.

Every product in the Foundation Stack carries a Campden BRI testing summary you can check with the steps above. Longevity+ provides 250 mg of nicotinamide riboside chloride (NR-CL) per capsule with TMG, pterostilbene and piperine, taken as 1 capsule a day. Metabolic+ combines berberine and milk thistle, and Essential+ provides vitamin D3 as cholecalciferol, vitamin K2 as MK-7 and magnesium as L-threonate in a vegan capsule; take both as directed on the label.

Shop NovusDNA's tested products